Hawke Vantage IR 3-9×40

Description

Hawke Vantage IR 3-9×40 Product description

• Seven Reticle Variants for Specific Applications: The Vantage IR 3-9×40 is available in seven illuminated reticle configurations covering a wide range of shooting disciplines. The L4A Dot (2.5 MOA) (art. no. 14218) provides a versatile general-purpose illuminated aim point. The 30/30 Centre Cross IR (art. no. 14220) combines a duplex crosshair with an illuminated centre cross for fast acquisition. The Mil Dot IR (art. no. 14221) adds mil dot reference points for holdovers and rough ranging. The Rimfire .22 LR HV (art. no. 14222) and Rimfire .22 LR Subsonic (art. no. 14223) provide holdover marks calibrated for high-velocity and subsonic .22 LR ballistics respectively. The Straight-Wall Marksman (art. no. 14217) features holdover points calculated specifically for straight-wall cartridge trajectories at the shorter distances typical of restricted hunting regulations. The Slug Gun/Muzzleloader (art. no. 14219) is a specialist configuration with a modified optical design discussed separately below.
• Calibre-Specific Holdover Reticles: Several variants use reticles calibrated at 9× — the Rimfire .22 LR HV, Rimfire .22 LR Subsonic, and Straight-Wall Marksman — with holdover marks positioned to match the ballistic trajectory of their respective cartridge types at that reference magnification. This allows the shooter to engage targets at known distances using the appropriate holdover point without dialling the turrets, which is a practical advantage in hunting situations where quick follow-up shots may be needed.
• Dual-Colour Illumination with 5 Brightness Levels: All seven variants feature reticle illumination in red and green across 5 brightness levels with off positions between each step, controlled via a stepped rheostat. This allows the shooter to choose the colour and intensity that provides the best contrast against the current target background and ambient lighting conditions.
• Specialist Slug Gun/Muzzleloader Configuration: The 14219 variant is engineered specifically for slug guns, muzzleloaders, and straight-wall cartridge rifles requiring additional eye relief. It features a dedicated holdover reticle combined with an extended 110mm of eye relief for safe use on platforms with significant recoil push. This variant also has a slightly narrower field of view (10.9 m @ 100 m), shorter length (307 mm), and reduced adjustment travel (85 MOA) compared to the other configurations.
• Parallax Optimised per Application: The general-purpose, muzzleloader, and straight-wall variants use fixed parallax at 91 metres. The Rimfire .22 LR HV and Rimfire .22 LR Subsonic variants use fixed parallax at 69 metres, optimised for the shorter engagement distances typical of .22 LR rimfire shooting.

About the Vantage Series

The Hawke Vantage series is the broadest riflescope lineup in Hawke’s product range, built on the H2 optical system and covering a wide variety of tube diameters, magnification ranges, and reticle configurations at an accessible price point. The range is designed for hunters, target shooters, and recreational shooters who require a reliable, versatile optic without the cost associated with higher-tier optical systems.

All Vantage models feature 11-layer fully multi-coated lenses delivering consistent light transmission across the magnification range. The lineup spans standard 1-inch, 30mm, and 34mm mono-tube chassis, covering first and second focal plane optics, illuminated and non-illuminated reticles, and a broad selection of reticle designs from simple duplex patterns through mil dot, calibre-specific, and specialist application variants. The Vantage IR 3-9×40 is one of the most versatile configurations within the lineup, available in seven illuminated reticle variants covering general hunting, rimfire, straight-wall cartridge, muzzleloader, and slug gun applications.

About the Model (Hawke Vantage IR 3-9×40)

The Hawke Vantage IR 3-9×40 is an illuminated riflescope platform available in seven configurations, each sharing the same core optical and mechanical specification while offering a reticle matched to a specific shooting application. The 3–9× magnification range with a 3× zoom ratio provides a field of view of 13 metres at 100 metres at minimum power and a 9× upper end for accurate shot placement at typical hunting and field distances.

The 40mm objective lens, combined with the H2 optical system and 11-layer fully multi-coated lenses, delivers consistent light transmission and a clear image across the magnification range. An exit pupil of 13.3 mm at 3× supports image brightness in low-light conditions. Six of the seven variants measure 315 mm in length and weigh 430 g, with 90mm of eye relief.

The L4A Dot (14218), 30/30 Centre Cross IR (14220), and Mil Dot IR (14221) are general-purpose illuminated reticle configurations with fixed parallax at 91 metres and 100 MOA of adjustment travel. The Straight-Wall Marksman (14217) shares the same dimensions and mechanical specification, with a reticle calibrated at 9× and holdover points matched to straight-wall cartridge trajectories — a practical choice for hunters in jurisdictions where straight-wall cartridges are required by regulation and where shots are typically taken at restricted distances. The Rimfire .22 LR HV (14222) and Rimfire .22 LR Subsonic (14223) also share the standard dimensions and 100 MOA adjustment, but use fixed parallax at 69 metres and reticles calibrated at 9× with holdover marks matched to high-velocity and subsonic .22 LR ballistics respectively, allowing reliable holdover shooting at the distances where .22 LR is most commonly used.

The Slug Gun/Muzzleloader (14219) is a distinctly different optical configuration. The extended 110mm eye relief accommodates the recoil characteristics of slug guns and muzzleloaders, and the reticle is designed for the arc trajectory of slugs and large-calibre projectiles at reduced velocities. Adjustment travel is 85 MOA, field of view is 10.9 metres at 100 metres, and the overall length is 307 mm.

All variants feature reticle illumination in red and green with 5 brightness levels and off positions between each step. The fast-focus eyebell allows rapid dioptre adjustment. All mono-tubes are nitrogen purged and fully sealed, providing waterproof, fogproof, and shockproof performance rated for all calibres.

About Hawke

Hawke Optics is a British optics brand registered in England and Wales, with products distributed across Europe, North America, and international markets. The company produces a broad range of optical products including riflescopes, airgun scopes, binoculars, spotting scopes, red dot sights, and laser rangefinders, covering applications from hunting and precision shooting to nature observation and marine use.

Hawke organises its riflescope lineup into distinct optical system tiers — from the entry-level H2 through H5 to the flagship H7 — with each tier reflecting the glass specification, coating technology, and mechanical feature level of the products within it. The Vantage series is built on the H2 system, representing the entry level of Hawke’s riflescope range and providing an extensive selection of configurations at an accessible price point.

Main Features

• Magnification: 3–9×
• Objective Lens Diameter: 40 mm
• Main Tube Diameter: 1 inch (25.4 mm)
• Reticle: Straight-Wall Marksman, calibrated at 9× (14217) / L4A Dot 2.5 MOA (14218) / Slug Gun/Muzzleloader (14219) / 30/30 Centre Cross IR (14220) / Mil Dot IR (14221) / Rimfire .22 LR HV, calibrated at 9× (14222) / Rimfire .22 LR Subsonic, calibrated at 9× (14223)
• Reticle Position: Second Focal Plane (SFP)
• Illumination: Yes, 5 levels (red & green), stepped rheostat with off positions between levels
• Click Value: ¼ MOA
• Elevation Adjustment Range: 100 MOA (14217, 14218, 14220, 14221, 14222, 14223) / 85 MOA (14219)
• Windage Adjustment Range: 100 MOA (14217, 14218, 14220, 14221, 14222, 14223) / 85 MOA (14219)
• Elevation Turret: Capped, Low-Profile, Resettable
• Windage Turret: Capped, Low-Profile, Resettable
• Parallax: Fixed (91 m / 100 yds) (14217, 14218, 14219, 14220, 14221) / Fixed (69 m / 75 yds) (14222, 14223)
• Field of View: 13–4.2 m @ 100 m / 39–12.7 ft @ 100 yds (14217, 14218, 14220–14223) / 10.9–3.5 m @ 100 m / 32.8–10.6 ft @ 100 yds (14219)
• Eye Relief: 90 mm (14217, 14218, 14220–14223) / 110 mm (14219)
• Exit Pupil: 13.3–4.4

General properties

Optical properties

Turret properties

Reticle properties

Parallax properties

Physical properties

Special features