Description
Hawke Endurance ED 12×50 Product description
- 12× Magnification — Highest in the Endurance ED Binocular Lineup: The 12× magnification provides the highest image scale in the Endurance ED range, delivering the detail resolution needed for demanding observation tasks at extended distances — identifying trophy quality, counting antler points, or resolving fine plumage detail in birding — where the additional magnification over 10× produces a meaningful practical difference. A tripod or stable rest is recommended at 12× to eliminate hand-shake blur during extended observation.
- Extra-Low Dispersion Glass with Phase Corrected BAK-4 Roof Prisms: The Extra-Low Dispersion (ED) glass reduces chromatic aberration and colour fringing on high-contrast subjects — particularly relevant at 12× where the higher image scale amplifies any optical shortcomings. The phase corrected BAK-4 roof prisms and fully multi-coated lenses maintain resolution and contrast across the full aperture, delivering a clear, well-resolved image for detailed subject identification.
- 50mm Objective Lens for Adequate Low-Light Performance at 12×: The 50mm objective lens provides an exit pupil of 4.2mm at 12× — maintaining adequate image brightness for hunting and wildlife observation in typical field lighting conditions. The 50mm objective is the minimum practical aperture for a 12× binocular intended for field use, as a smaller objective at this magnification would produce a very small exit pupil and a noticeably dim image in variable light.
- Wide Apparent Field of View at 12×: The field of view of 91 metres at 1,000 metres and apparent field of view of 62° are notably broad for a 12×50 binocular — supporting landscape scanning and target tracking at the high magnification without the extremely narrow tunnel view typical of some binoculars in this class.
- Waterproof and Fogproof with Tripod Thread and Stay-On Covers: The body is nitrogen purged, waterproof, and fogproof with a high-grip rubber exterior. The built-in ¼”-20 UNC tripod mounting thread enables tripod use — strongly recommended at 12× for steady, fatigue-free extended observation. Twist-up eyecups with position stops and 15mm of eye relief accommodate both bare-eyed and eyeglass-wearing users. Stay-on objective lens covers remain attached during use.
About the Endurance ED Binocular Series
The Endurance ED series is Hawke’s mid-tier binocular range, built on the H5 optical system and positioned between the entry-level Nature-Trek and Vantage series and the flagship Frontier ED X above it. The series is designed for hunters, birders, and nature observers who want Extra-Low Dispersion glass and phase-corrected prisms in a practical, field-ready package at an accessible price point.
All Endurance ED models feature ED glass, phase corrected BAK-4 roof prisms, fully multi-coated lenses, nitrogen purging, waterproof and fogproof sealing, twist-up eyecups with position stops, stay-on lens covers, and a built-in ¼”-20 UNC tripod mounting thread. The series spans 8×32, 10×32, 8×42, 10×42, 10×50, and 12×50 configurations. The 12×50 is the highest-magnification model in the lineup, intended for users who need maximum image scale for demanding observation at extended distances.
About the Model (Hawke Endurance ED 12×50 — Green)
The Hawke Endurance ED 12×50 is the highest-magnification model in the Endurance ED binocular range, designed for hunters, birders, and nature observers who need maximum image scale for detailed identification at extended distances. The 12× magnification with a 50mm objective lens delivers a field of view of 91 metres at 1,000 metres and an apparent field of view of 62° — broad for the 12×50 class — while the exit pupil of 4.2mm maintains adequate image brightness for typical field lighting conditions.
The ED glass lens elements reduce chromatic aberration and colour fringing at 12×, where colour accuracy and resolution are most critically affected by any optical shortcomings. The phase corrected BAK-4 roof prisms and fully multi-coated lenses deliver a clear, well-resolved image for the demanding identification tasks this magnification level is suited to. The close focus distance of 2.5 metres extends usability to moderate close-range subjects.
The body is nitrogen purged, waterproof, and fogproof with a high-grip rubber exterior. The built-in ¼”-20 UNC tripod mounting thread enables tripod use — strongly recommended at 12× for steady observation during extended glassing sessions. The twist-up eyecups with position stops and 15mm of eye relief accommodate both bare-eyed and eyeglass-wearing users. Stay-on objective lens covers remain attached during use. Weight is 805 g and dimensions are 120–135 mm wide × 167 mm high.
About Hawke
Hawke Optics is a British optics brand registered in England and Wales, with products distributed across Europe, North America, and international markets. The company produces a broad range of optical products including riflescopes, airgun scopes, crossbow scopes, red dot sights, reflex sights, binoculars, spotting scopes, and laser rangefinders, covering applications from hunting and precision shooting to nature observation and marine use.
Hawke organises its product lineup into distinct optical system tiers — from the entry-level H2 through H5 to the flagship H7. The Endurance series is built on the H5 system, representing the mid-tier of Hawke’s product range across binoculars, monoculars, riflescopes, spotting scopes, red dot sights, rangefinders, and marine optics.
Main Features
- Magnification: 12×
- Objective Lens Diameter: 50 mm
- Prism System: BAK-4 Roof Prism, Phase Corrected
- Prism Coating: Silver Mirror Coating
- Lens Type: Extra-Low Dispersion (ED) Glass
- Field of View: 91 m @ 1,000 m / 272 ft @ 1,000 yds
- Apparent Field of View: 62°
- Eye Relief: 15 mm
- Exit Pupil: 4.2 mm
- Close Focus Distance: 2.5 m / 8.2 ft
- Interpupillary Distance: 58–75 mm
- Dioptre Adjustment: Right Eye
- Eyecups: Twist-Up with Position Stops
- Tripod Mounting Thread: Yes (¼”-20 UNC)
- Lens Coating: Fully Multi-Coated
- Optical System: H5
- Construction: Nitrogen purged, waterproof, fogproof
- Dimensions (W × H): 120–135 × 167 mm
- Weight: 805 g
- Colour: Green
Warranty
The binoculars are covered by a 10-year warranty.
In the Box
- Binoculars
- Protective Carry Case
- Carry Case Strap
- Protective Pouch
- Neck Strap
- Objective Lens Covers (Stay-On)
- Ocular Lens Covers
- Lens Cloth
- Instruction Manual
General properties
| Manufacturer | Hawke |
|---|---|
| Binoculars series | Hawke Endurance ED |
| Made in | China |
| In production since | 2015 |
| Warranty | 10 years |
| SKU | 36210c |
Optical properties
| Prism type | Roof – Schmidt/Pechan |
|---|---|
| Variable magnification | No |
| Magnification. | 12.00 x |
| Diopter range | – |
| Lens diameter. | 50.00mm |
| Exit pupil. | 4.20mm |
| Field of view… | 82.00 m/1000m |
| Field of view (deg.). | 4.69 ° |
| Eye relief. | 13.00 mm |
| Close focus. | 2.50 m |
| Twilight Factor | 24.49 |
| Light transmission | – |
| Relative Brightness | 17.4 |
Physical properties
| Lens coating | Fully Multicoated |
|---|---|
| Length. | 165.00mm |
| Width. | 133.00mm |
| Weight. | 794.00 g |
| Working temperature range | – |
| Filled with | Nitrogen |
| Focusing system | Central |
| Diopter setting position | Right eye-piece |
| Min. interpupillary. | 60.00mm |
| Max. interpupillary. | 75.00mm |
| Body type | Single hinge |
Special features
| Waterproof | Yes |
|---|---|
| Fogproof | Yes |
| Tripod adaptable | Yes |
| Compass | No |
| Built-in rangefinder | No |
| Image stabilizer | No |
| Floatable | No |



![Makita TW005GZ 40V Cordless Brushless Impact Wrench (XGT Series) [Bare Tool]](https://www.greatdiyhardware.com/wp-content/uploads/2026/07/makita-tw005gz-40v-cordless-brushless-impact-wrench-xgt-series-bare-tool.webp)
