TrendRounding over 2.0mm radius x 9.5mm cut- C074CX1/4TC

Description

The Trend Rounding over 2mm radius x 9.5mm cut with 1/4″ shank

• Self-guiding cutters for rounding over edges do not require a side fence.
• They are supplied with two bearings.
• Use the larger bearing for a round-over.
• If the cutter is lowered, a top quirk can be produced.
• Bullnose mouldings can also be produced

For a quality finish everytime, use Trend Jigs, Templates , Routers, Tables